Load cards and photo paper
To load cards and photo paper
Use these instructions to load photo paper.
1.
Lift the output tray.
2.
Slide out the paper width guide in the input tray as far as possible.
3.
Insert the media print-side down in the tray. Make sure the stack of media is
inserted as far inside the printer as possible and does not exceed the line
marking in the tray. If the photo paper has a tab along one edge, make sure the
tab is pointing towards the front of the printer.
NOTE: Do not load paper while the printer is printing.
4.
Slide the media guides in the tray until they touch the edge of the stack of media.
Chapter 1
22
Get started
5.
Lower the output tray.
6.
Pull out the tray extender.