Hardware installation suggestions
Check the printer
•
Make sure that all packing tape and material have been removed from outside
and inside the printer.
•
Make sure that the printer is loaded with paper.
•
Make sure that no lights are on or blinking except the Ready light, which should
be on. If the Attention light is blinking, check for messages on the printer control
panel.
Check the hardware connections
•
Make sure that any cords and cables that you are using are in good working
order.
•
Make sure that the power cord is connected securely to both the printer and to
a working power outlet.
Check the ink cartridges
Make sure that all of the ink cartridges are firmly installed and aligned in their correct,
color-coded slot. A correctly installed ink cartridge should not move when pulled
slightly. The printer cannot work if all the ink cartridges are not installed.